Comparison between hot melt adhesive and traditional sealing tape and packaging tape in the use of cardboard box sealing

2023-12-20 63
Comparison of the use of hot melt adhesive and sealing tape in cardboard box sealing

Apply non drying adhesive tape (sealing tape) and hot melt adhesive for each item

1. Poor adhesion strength, low tensile strength, and poor adhesion to coated or oily cardboard, which can burn through the coating, resulting in high adhesion strength

2 simple wrinkles and self-adhesion, resulting in shutdown without wrinkles and self-adhesion issues

3 tape replacement requirements result in downtime of approximately 8-16% per shift. Adding glue will not cause downtime

4. The storage validity period of the tape is six months and certain storage conditions are required. Otherwise, the storage period of the simple molting hot melt adhesive is 2 years, and the storage area is small, without any special storage requirements

5. Poor performance in low temperature resistance. In the cold climate of the north, the easy to open adhesive has good low temperature resistance, which can be as low as -40 ℃

The BOPP data used for the 6-box adhesive tape is a non environmentally friendly product that pollutes the environment and affects the export of the product. The defect of hot melt adhesive is suitable for environmental protection requirements, and there is no doubt about waste disposal. The product is suitable for export to European and American countries

Comparison of the use of B hot melt adhesive and packaging tape in cardboard box sealing

Item bundling plastic woven tape (packing tape) hot melt adhesive

When transporting, lifting the cardboard box with a strapping tape can easily damage the outer surface of the cardboard box. The hidden bonding method will not damage or affect the delicate printing of the cardboard box

The transportation process of 2 cardboard boxes is simple, with deformation and even cracking. The overall strength of the cardboard boxes is strengthened, making them less prone to deformation and cracking

3. The equipment needs to frequently adjust the tension of the tensioning belt, and to change the belt, it needs to be stopped without repeated adjustments and without the need to stop and add materials

Article organization sealing glue manufacturer www.hshangli.com