In daily life, we often encounter such troubles: when the adhesive tape on the surface of the desktop, glass, or cup is peeled off, it will leave a sticky and difficult to remove mark, which affects the appearance. Over time, it will attach a layer of dust and appear very unclean. Today, the editor will give us some good methods to remove the traces of tape.

How to remove double-sided tape
1. Don't tear off that layer of paper for now, use a hair dryer to heat it up, and then you can take it off with just one grip.
2. If there are already dark marks left, you can apply some white flower oil from home on it, wipe it off with a cloth, and clean it with water. If you don't have white flower oil at home, you can use things like wind oil essence or drop oil to repeatedly apply it.
3. If there are not many black marks on the pasted area, you can use an eraser to wipe it. If the area is large, anhydrous alcohol, also known as industrial alcohol, can be used to apply it to the position where it is posted, and then wiped with a cloth.
4. Use a dry cloth soaked in vinegar to cover up all traces, such as when the double-sided tape is completely wet, it can be quietly scraped off with a ruler.
How to remove foam double-sided adhesive
1. If pasted on the wall, you can use a pointed object to scrape open a small corner, and then use your hand to press down on that small corner and tear it down. This method is quite tiring, but it won't leave any traces.
2. If it is pasted on the plastic, first dip a towel in hot water, wet all the foam double-sided adhesive tape, and then find the small corner and slowly scrape it off.
3. If pasted on glass, you can test the use of cleaning powder. Take some cleaning powder and place it on a semi wet cloth, then scrub back and forth several times. If it is a harder mark, you can first wet the mark thoroughly and then use cleaning powder.
4. Soak the cloth in warm water first, then scrub the direction of the marks. While wiping, usually spray detergent. After a while, the offset will become soft and easy to remove.

How to remove the double-sided tape on the wall
1. First, use the polishing water of nail polish paint to scrub. Due to the ability of water removal to cause the original color of the wall to fall off. This method is advocated for use in inconspicuous small areas, and is not recommended for use on large, conspicuous walls.

2. The method of heating is to soften the double-sided tape. Blowing it with a hair dryer can make the double-sided tape softer and easily remove any traces.

3. We can use a dry cloth soaked in vinegar to cover all the traces of double-sided adhesive tape, and once the adhesive stains on the double-sided adhesive tape are completely wet, they can be easily removed with a ruler.
How to remove the double-sided adhesive on the door
1. Soak a tissue in vinegar, then quietly stick it onto the double-sided tape, apply it for three to four minutes to allow the double-sided tape to fully absorb, and then quietly peel it off without affecting the door. Vinegar doesn't need too much, just make sure the double-sided tape is moist. After removing it, wipe the door and quietly print it with a clean tissue.
2. If you know there will be residue when removing the double-sided adhesive, you can use a hair dryer to blow it off and heat it up.
3. If it is a large area, it is recommended to use gasoline, which is also very useful, but the speed should be faster, as gasoline will evaporate over time.
4. Use a little letter to wipe it off with water, maybe you can also use paint thinner

Article organization sealing glue manufacturer www.hshangli.com